With the addition of the new Elite Falcon 145HV/SB came the addition of the Flacon ESC cooling fan fit to that ESC. The new fan is designed to fit the Falcon 120/130HV and the 145HV/SB electronic speed controls.
Check it out here.
The new Falcon 145HV/SW ESC by Elite is now in stock!
The Falcon product line represents advanced speed controllers for exclusive use in airplanes, drones, sailplanes or any kind of radio control application. With integrated telemetry and various possibilities of optional user configuration, the controllers offer high efficiency, low weight and precise motor control. The telemetry system in the Elite Falcon ESC lets you monitor in real time the Amperage (Amp), Voltage (V), and Capacity (mAh) consumed from the battery, ESC even calculates Power (W) output of the system. You can also measure the ESC Temperature and add external Motor Temperature and Propeller Positioning sensors. The Elite Falcon line of Brushless ESCs adds another revolutionary feature utilizing Backup Battery Integration. We have created a more robust hardware platform including increased cooling capability, smaller overall packaging, and selectable sensitivity to allow you to use any brushless motor that you choose. No matter which size you choose, the Elite Falcon series brushless speed controllers are right for your next project.
Check it out here.
The new Esprit Elite HD Outrunners have a built in telemetry sensor to measure the core temperature of the motor. They are offered in 30cc, 35cc, and 40cc equivalents.
Elite series motors are the culmination of years spent designing and testing in extreme environments. Motors feature hardened steel shafts, built in fans, and a large radial bearing designed to carry the load placed on the open end of the rotor. Elite T125 (Jeti EX, Graupner HoTT, Futaba S.Bus2) micro telemetry sensor is installed in the motor to measure core temperature. These features, combined with an easy to maintain and repair design, promise years of worry free use.
Head on over to the site and check them out!
The Elite Falcon Electronic Speed Controllers 145/200/220 contains a driven output for the external fan (5V, up to 300mA). It is activated as soon as the controller temperature reaches 55°C. Take a look at the diagram below to see how it is properly connected.
Note: If the pins are misaligned, a result of the fan spinning backwards (connected one pin over) or the fan running continuously (connector is upside down) will occur.
Our Elite Falcon ESC’s are able to communicate with most of the common transmitter telemetry systems available. Here is an example where the Elite Falcon is collecting Spektrum Telemetry using the Spektrum SRXL2 protocol.
Many of you may be familiar with the Elite EX-5 Serial Bus & Servo Channel Expander, but now we would like to introduce the EX-5 K. The EX-5 K offers all the same great features as the EX-5 (such as multiple protocol support, telemetry, gyro-stabilized servo outputs, and more) but comes in an easier-to-install design. All inputs are encased inside a sturdy plastic housing, complete with a pre-installed installation bracket.
Specifications and Features
– Supported Protocols: Jeti EX, Multiplex M-LINK, Graupner HoTT, Futaba S.Bus/S.Bus2
– Small dimensions and high current throughput via the integrated MR30 power connectors.
– Telemetry (RC system dependent): Temperature, Voltage, G-Force (+/-30G), Attitude (Roll/Pitch/Yaw).
– Gyro-stabilized servo outputs, EX Bus, SRXL16ch. or S.Bus.
– Flight stabilization offering 3 configurable flight modes (Manual/Acro/Horizon).
– Automatic detection of serial data/telemetry after startup.
– Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX).
– Firmware updates via USB interface.
Check out the entire line of Elite Products here.
Introducing the Elite Voltario T70. Like the Voltario T60, the T70 is a high performance, digital dual redundant battery switch with advanced telemetry features and touch switch functionality. It combines a backup battery charging circuit and telemetry functionality in a single device. The T70 however, offers additional expander ports that are not provided by the T60. The T70 is offered in two versions depending upon your set up. One option supports dual batteries, the other supports ESC/battery combinations.
Specifications and Features
Read more here!
Firmware updates have just been released for many different Esprit Elite products. Read below to learn what is new and head over to the MAV Manager to update your device.
Find the entire line of elite products here.
Possibilities are endless with the Falcon Line of ESC’s. Due to the advanced processor capabilities inside the equipment, Falcon ESC’s offer many advantages. Check out this video we made to demonstrate motor reversal by simply flipping a switch on your Jeti transmitter!
Look who has crossed over to the Jeti side! Welcome to the wonderful world of Jeti, Pablo. We know it will be everything you hope and then some.
