With the addition of the new Elite Falcon 145HV/SB came the addition of the Flacon ESC cooling fan fit to that ESC. The new fan is designed to fit the Falcon 120/130HV and the 145HV/SB electronic speed controls.
The Elite Falcon Electronic Speed Controllers 145/200/220 contains a driven output for the external fan (5V, up to 300mA). It is activated as soon as the controller temperature reaches 55°C. Take a look at the diagram below to see how it is properly connected.
Note: If the pins are misaligned, a result of the fan spinning backwards (connected one pin over) or the fan running continuously (connector is upside down) will occur.
We love our line of Falcon ESCs, so much so that they get run hard. So hard, that a little extra cooling adds a HUGE benefit.
The Elite Falcon ESC Cooling Fan improves air circulation and heat transfer even under less than ideal installation conditions. The cooling fan has a 5-8.4V operating range and consumption of 0.2-0.5A. Easily install the ESC Cooling Fan, with included installation hardware, by mounting the fan directly on top of the ESC.
Simply install the cooling fan to the top of the heat sink on the ESC and plug in a standard JR-type connector to any free channel of the receiver.