The new Falcon 145HV/SW ESC by Elite is now in stock!
The Falcon product line represents advanced speed controllers for exclusive use in airplanes, drones, sailplanes or any kind of radio control application. With integrated telemetry and various possibilities of optional user configuration, the controllers offer high efficiency, low weight and precise motor control. The telemetry system in the Elite Falcon ESC lets you monitor in real time the Amperage (Amp), Voltage (V), and Capacity (mAh) consumed from the battery, ESC even calculates Power (W) output of the system. You can also measure the ESC Temperature and add external Motor Temperature and Propeller Positioning sensors. The Elite Falcon line of Brushless ESCs adds another revolutionary feature utilizing Backup Battery Integration. We have created a more robust hardware platform including increased cooling capability, smaller overall packaging, and selectable sensitivity to allow you to use any brushless motor that you choose. No matter which size you choose, the Elite Falcon series brushless speed controllers are right for your next project.
Esprit Tech stands behind the quality of the products we sell. That is why quality control checks are important to us. At MAV Sense, all Elite Falcon Electronic Speed Controls are factory tested and must pass quality checks before they are shipped out. Each and every ESC undergoes a full spectrum calibration before leaving the manufacturer. The speed controls must pass quality checks in regard to voltage, amperage, used capacity, and temperature. Once these requirements are met, the ESC’s are then able to be shipped to their final destinations.
The recent 2.01 Firmware updates for the Falcon Line of ESC’s now include a Heli/Governor mode! The speed controllers contain a fast and precise governor function. With many parameters available to program, you are able to precisely dial in the settings for your specific needs.
The Elite Falcon Electronic Speed Controllers 145/200/220 contains a driven output for the external fan (5V, up to 300mA). It is activated as soon as the controller temperature reaches 55°C. Take a look at the diagram below to see how it is properly connected.
Note: If the pins are misaligned, a result of the fan spinning backwards (connected one pin over) or the fan running continuously (connector is upside down) will occur.
Our Elite Falcon ESC’s are able to communicate with most of the common transmitter telemetry systems available. Here is an example where the Elite Falcon is collecting Spektrum Telemetry using the Spektrum SRXL2 protocol.
We are excited to announce another addition to the already fantastic line of Falcon ESCs. The Elite Falcon 145HV/SB is an electronic speed controller with integrated telemetry (Jeti EX, HoTT, S.Bus2, PB) and a 15 amp BEC. In the lab, the Falcon 145HV has been pushed to its max. Test results showed it could withstand an electric current of up to 200 amps – this thing is nearly indestructible! These guys can also support a 12S battery set up.
We expect the Falcon 145HV to join our product lune around late June.
We love our line of Falcon ESCs, so much so that they get run hard. So hard, that a little extra cooling adds a HUGE benefit.
The Elite Falcon ESC Cooling Fan improves air circulation and heat transfer even under less than ideal installation conditions. The cooling fan has a 5-8.4V operating range and consumption of 0.2-0.5A. Easily install the ESC Cooling Fan, with included installation hardware, by mounting the fan directly on top of the ESC.
Simply install the cooling fan to the top of the heat sink on the ESC and plug in a standard JR-type connector to any free channel of the receiver.
Possibilities are endless with the Falcon Line of ESC’s. Due to the advanced processor capabilities inside the equipment, Falcon ESC’s offer many advantages. Check out this video we made to demonstrate motor reversal by simply flipping a switch on your Jeti transmitter!
Someone’s year is off to a great start – this beautiful store display Sokol (Falcon) just sold!
Store Display, Brand NEW Sokol (Falcon) Full Composite, Gel Coated, Receiver and Battery Ready Pylon Racer. Model has been expertly built at our shop with the best possible equipment. Sokol uses light setup with 4.7×4 prop, 1800mAh 3S battery. Upgrade to 30A ESC and 4.75×4.75 prop for crazy like experience.