New Addition to Our Line of Elite Motors

Just Added, Built in Telemetry

The new Esprit Elite HD Outrunners have a built in telemetry sensor to measure the core temperature of the motor. They are offered in 30cc, 35cc, and 40cc equivalents.

Elite series motors are the culmination of years spent designing and testing in extreme environments. Motors feature hardened steel shafts, built in fans, and a large radial bearing designed to carry the load placed on the open end of the rotor. Elite T125 (Jeti EX, Graupner HoTT, Futaba S.Bus2) micro telemetry sensor is installed in the motor to measure core temperature. These features, combined with an easy to maintain and repair design, promise years of worry free use.

Head on over to the site and check them out!

Esprit Elite Device Firmware Updates

Multiple Firmware Updates Just Released

Firmware updates have just been released for many different Esprit Elite products. Read below to learn what is new and head over to the MAV Manager to update your device.

Find the entire line of elite products here.

Elite AMS Competition Altitude Motor Switch, Variometer & Altimeter w/Telemetry 

  • AMS RELEASE NOTES: VERSION 1.07
    • PowerBox P2Bus telemetry support has been added. Available telemetry values: Altitude, pressure, temperature, throttle output, off-altitude…
    • Configurable telemetry slots in S.Bus2 telemetry mode. Use the MAV Manager software to change the configuration. After changing the slot range please choose the “VARIO-1672” sensor type on the appropriate slot in your Futaba transmitter.
    • Configurable telemetry slots in Multiplex MSB telemetry mode. Use the MAV Manager software to change the configuration.
    • In the RC-E7 mode you can now change the shutdown altitude. Default shutdown altitude is 120m
    • PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.

Elite Falcon ESC

  • FALCON/IBEX ESC RELEASE NOTES: VERSION 1.10
    • Improved on-the-fly startups (When the propeller is spinning).
    • Optimized PC configuration.

Elite EX5 Serial Bus & Servo Channel Expander

  • EX5 RELEASE NOTES: VERSION 1.04
    • Improved compatibility with JETI EX Bus 24-channel mode.
    • Added PowerBox P2Bus support on Rx1/Rx2 inputs, including telemetry.
    • Added stabilization gain tuning. Using spare Bus channels, it allows you to assign up to 3 channels to control the stabilization gains of each model axis during flight. After you assign the channel operated e. g. by a potentiometer, the behavior will be similar to a standard gyro:
      • Potentiometer in the middle (0% ~ 1.5ms) effectively disables the stabilization since all gains will be set to zero.
      • Potentiometer to the left (< 1.5ms) activates the “Heading Hold” mode. o Potentiometer to the right (> 1.5ms) activates the “Normal” mode.
Gain Tuning

Elite SE4 Servo Channel Expander Serial Bus to PWM

  • SE4 RELEASE NOTES: VERSION 1.03
    • Improved compatibility with JETI EX Bus 24-channel mode (in connection with EX5, SE6 or additional SE4 devices)
    • Added PowerBox P2Bus support on the Rx input, including telemetry (voltage/temperature).
    • PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.

Elite SE6 Servo Channel Expander Serial Bus to PWM

  • SE6 RELEASE NOTES: VERSION 1.03
    • Improved compatibility with JETI EX Bus 24-channel mode.
    • Added PowerBox P2Bus support on the Rx input, including telemetry (voltage/temperature).
    • PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.

Elite Telemetry Sensor High Speed GPS

  • GPS LOGGER RELEASE NOTES: VERSION 1.03
    • Configurable telemetry slots in S.Bus2 telemetry mode. Use the MAV Manager software to change the configuration. Available slots: 8 – 15, 16 – 23, 24 – 31.
    • Configurable telemetry slots in Multiplex MSB telemetry mode. Use the MAV Manager software to change the configuration.
    • PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.

Elite Telemetry Sensor Micro Variometer & Altimeter

  • MICROVARIO RELEASE NOTES: VERSION 1.07
    • PowerBox P2Bus telemetry support has been added. Available telemetry values: Altitude, pressure, temperature.
    • Configurable telemetry slots in S.Bus2 telemetry mode. Use the MAV Manager software to change the configuration. After changing the slot range please choose the “VARIO-1672” sensor type on the appropriate slot in your Futaba transmitter.
    • Configurable telemetry slots in Multiplex MSB telemetry mode. Use the MAV Manager software to change the configuration.
    • PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.

Elite Telemetry Sensor Micro Temperature T125

  • T125(ID) RELEASE NOTES: VERSION 1.03
    • PowerBox P2Bus telemetry support has been added.
    • Configurable telemetry slots in S.Bus2 telemetry mode. Use the MAV Manager software to change the configuration. After changing the slot number please choose the “T125” sensor type on the appropriate slot in your Futaba transmitter.
    • PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.

Falcon Carbon Fiber E-Spinners

Beautiful, high gloss Carbon Fiber spinners with pre-cut blade slots, special cooling holes, and specially designed aluminum backplate.

Falcon Carbon Fiber spinners come with precut slots for the propeller blades, and specially designed front of the spinner with additional openings for direct intake of the cooling air. The backplate is considered an engineering marvel, anodized, super light with arms shaped to help create additional airflow.

Click here for More Information!

Jeti Telemetry Sensor Fuel Flow MFlow2

Jeti Telemetry Fuel Flow MFlow2 T and G EX digital flow sensors measure the true fuel flow of gasoline or turbine jet fuel.

The Jeti MFlow2 EX sensor allows you to set your “Low/High Fuel” alarms and gives you accurate reading of fuel consumption. Also allows you to setup remote commands for transmitter wireless value reset. Turbine flow sensor is equipped with Festo 4mm fuel line connectors. Gasoline sensor can be used with Medium 3/32″ (2.4mm), Large 1/8″ (3.2mm) ID fuel tubing.

Through the Duplex 2.4GHz system and either a JetiBox Profi or Jeti Transmitter you can monitor your data and alarm conditions in real time. Make sure that in the Devices folder of your SD card you have a configuration file “MFLOW2.bin”. 

Flow Rate: 20 to 800 ml/minute with 2% resolution
Operational Voltage: 5V to 8.4V
Dimensions: 75mm x 40mm x 30mm
Weight: 40g
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi

Shop Now!

Vitaprop Carbon Fiber Folding Propellers

Vitaprop Carbon Fiber folding propellers were specifically designed for high performance electric motors.

Propellers feature high Carbon Fiber content for light weight, professionally laid CF cloth for extreme torsion rigidity and aluminum shoulder inserts for extreme durability.

Made of carbon-fiber. Sold in pairs.

Shop Now