Just in time for building projects, the Secraft assembly kit is the answer to your prayers. Kits range in sizes from 31% to 40% and include a lightweight tail wheel, centering springs and a plastic mount built to last.
The Secraft Tailwheel Assembly kits are a perfect match for any RC airplane.
Get yours, HERE!
Used Equipment
Get yours, HERE!
Congratulations from all of us here in the USA, very well done! We are impressed by just how clean this set-up is.
Used Equipment
Learn more about this beauty, HERE.
Jeti customer Evan Sayres has taken on an amazing new project in this Bell Invictus 360. Starting with a 3D printed plug, Evan will eventually be molding the fuselage for a true scale appearance.
The model will feature dual motors, a scratch built set of mechanics, and a Vario fenestron tail setup. The finished model will be controlled by Jeti Duplex radio gear.
We can’t wait to see if Evan meets his goal of flying his model before Bell launches the full scale release.
After receiving numerous questions regarding getting extra channels while using Jeti Central Box 210/220 we have come up with elegant configuration that uses power from CB210/220 servo port 9/10 for Central Box 100. This way you can have up to 20 high power servos connected to the system and still have full battery telemetry & redundancy.
If you connect Telemetry to the CB100 and use CB100 only for noncritical functions (Gyro, Lights, Airbrakes…) you can get away with a single power lead and go up to 22 servos.
Get yours, HERE!
With its fiberglass fuselage and its carbon fiber reinforced, obecchi sheeted foam wings the Ventus 2cx can handle full day of soaring as well as limited aerobatic routine. The careful use of composites with competition balsa, creates a good light structure that will hold its shape for a long time. Finished with the new Front Electric Sustainer/Self-Launcher (FES) Elite series motor.
The FES motor is the culmination of years spent designing and testing in specialized environments. Motors feature hardened steel shafts, built in fans, a large radial bearing designed to carry the load placed on the open end of the rotor, and an enclosed shaft extension that includes its own bearing. We feel that these motors are the perfect solution for your electric powered scale sailplanes. These features, combined with an easy to maintain and repair design, promise years of worry free use.
Get your Ventus, HERE!
Look at this beauty!
Store Display, Brand NEW Prelude REF 2.5E sailplane receiver ready. Model has been expertly built at our shop for store display. Recommended battery: 2700 3S
One of the most impressive European made sailplanes that we have ever seen, the Prelude 2.5E REF flies as good as it looks. Gentle, smooth, and very long flights are the standards for this beauty. The careful use of composites with competition balsa, creates a good light structure that will hold its shape for a long time.
Included:
(1) Prelude REF 2.5E $315.00
(1) AXi 2820/14 V2 Sailplane brushless motor $95.00
(1) Jeti Advance 40 Pro SB ESC $79.00
(2) Hitec HS-5065MG servo (flaps) $66.00
(2) Hitec D85MG servo (elevator, rudder) $78.00
(1) BB Turbo 40/5/8mm folding spinner $23.00
(1) Aeronaut 14×8 folding propeller $15.00
(2) Servo extension $8.00
(1) Deans connector $3.00
(1) Velcro Strap $3.00
(1) Servo Frame $20.00
(1) Building Services $250.00
Get yours, HERE!
Micro Vario is a device that measures temperature and atmospheric pressure. Using the obtained data it calculates the Relative/Absolute Altitude and Rate of Climb/Descent. Changes in climb and descent rates are signaled as well. The sensor alerts you if any alarm setting is exceeded. Simply Plug & Play solution for your Jeti, Futaba or Graupner RC System.
The sensor enables an acoustic signal for the climb rate/descent rate or for exceeding of a pre-adjusted limit value. The acoustic signal consists of different tones (steps) for climbing and the same amount of steps for descending. The step width can be adjusted by the user. The climb signal consists of short interrupted tones, the descent signal consists of long permanent tones.
With Jeti Duplex RC system Micro Vario takes advantage of the 2.4GHz band for communication. This system not only transmits control data to the model but also sends data from the model back to the transmitter. The telemetry data collected during operation is shown as actual, measured values in real time on either LCD screen of a connected JetiBox Profi or on the DC/DS line of Jeti transmitters.
Compatibility: Jeti Duplex EX, Multiplex MSB, Graupner HoTT, Futaba S.Bus2
Altitude Resolution: +/- 0.1m
Pressure Range: 300-1200hPa
Operational Voltage: 3.5V to 12V
Dimensions/Weight: 21.5mm x 10mm x 4mm/2g
Programmable: Using JetiBox, JetiBox Mini and JetiBox Profi
Get yours, HERE!
Store Display, Brand NEW Grafas MAXi 3.5 electric sailplane battery and receiver ready. Model has been expertly built at our shop for local competition.
Condition of item: Store Display, Never Flown, Brand NEW
One of the most impressive European made sailplanes that we have ever seen, the new Grafas MAXi 3.5E flies as good as it looks. The new Grafas MAXi 3.5E was designed as the latest and largest addition to the ever-growing family of hand-made electric sailplanes by TopModel CZ. Gentle, smooth, and very long flights are the standards for this beauty. The careful use of composites with competition balsa, creates a good light structure that will hold its shape for a long time. The synergy of low weight and strong structure is very unusual in a production sailplane and can only be achieved with careful attention to design and construction.
The entire model is constructed using free-flight techniques. Top Model uses the latest construction techniques such as CNC milling and laser cutting. The wings as well as horizontal tail are all balsa built-up with Carbon Fiber main spare and leading edge. The fuselage is gel-coated fiberglass with white finish. Whole model is covered with Ultracote. All control surfaces are hinged with adhesive tape. This fully built sailplane needs only basic assembly and motor/radio installation. The 3-piece wing and full flying stabilizer are each easily removable for transport and storage. Each part is carefully hand-crafted with meticulous attention to detail. Value is simply incredible.
Get it, HERE!
