Just wanted to let everyone know that the Jeti Flight Fest 2018 is open for registration! Head over to RC Flight Deck and sign up! Only pilots need to register.
Keep an eye on the site as Opale’s RC Skydiver Steven gets closer to landing in the USA!
If you have viewed our site recently, you may have noticed that we now carry a total of four different series of Graupner servos. Although each series offers a slightly different performance factor, ALL of the Graupner servos we have are programmable! Simply download the software suite found here, and update your servo firmware via the cable (coming soon). After installation go to the link tab on the bottom and look for the servo setup link.
Join Jeti USA, Esprit Tech, and the Airmasters RC Club for Fun, Fellowship and Hospitality at Jeti Flight Fest 2018! Bring the whole family and enjoy a weekend for Friends, Family, Food, and Flying. Every registered pilot will be entered in to our pilot raffle for their chance to win a Limited Edition Jeti DS-14 Diablo Transmitter, among many other prizes. Dates are March 30th and 31st 2018. Registration will open shortly. See you there!
In addition to the new HVS line of Graupner Servos, we have added Graupners line of brushelss servos! Manufactured with high-quality components such as ball bearings, the Graupner HBS Servos provide the same great performance as a common standard servo. Optimized for high voltage and specially designed around a high-performance brushless motor, precision cut metal gears, and heat sink case to provide lower operating temperatures and longer run times, these servos will blow any standard servo out of the water. Fully programmable and a 2048 high resolution to meet your unique specifications (via the free Graupner Servo Setup Software) the HBS Line is ideal for all model types.
Introducing the HVS series servos by Graupner. These digital servos are optimized for higher voltage input (up to 8.4V) with an aluminum heat sink for lower operating temperatures and longer run times. The HVS servos provide speed and holding power with low dead band technology for extra reliability and can be programmed to your unique specifications with our PC-based servo software.
*Diagram pictured for GRSJ7970
We saw the Opale Hybrid 5.2 soaring high above the Swiss Alps, now take a look at the smaller Oxy 0.5. Size aint got nothin’ on this guy!
Also new to our line of Estar Kits is the Fokker E.III Eindecker.
The Fokker Eindecker fighters were a series of German World War I monoplane single-seat fighter aircraft designed by Dutch engineer Anthony Fokker. Developed in April 1915, the first Eindecker (“Monoplane”) was the first purpose-built German fighter aircraft and the first aircraft to be fitted with a synchronization gear, enabling the pilot to fire a machine gun through the arc of the propeller without striking the blades.
Read more on RCGroups here.
This highly prefabricated kit belongs in the “super scale competition” models category. Once finished, the entire airframe construction is extremely light and clean but still able to withstand high loads. The manufacturer uses the latest construction techniques including Laser CNC cutting to achieve high strength and low weight. Each part and every detail are meticulously made.
– Control surfaces: Ailerons, Elevator and Rudder
– All balsa/ply built-up construction
– One piece removable wing
– Just assemble and then glue the structure
– Fully illustrated instruction manual
– Laser cut interlocking structure
– Scale wire landing gear