Category: Radio

This update brings additional options for digital inputs and outputs to the Central Box 200. Now you can simply control your LED lights using the Central Box only. The Central Box can function as an EX Bus expander so you can join several Central Boxes together and you’ll have perfect signal distribution and control redundancy in a model.

http://www.espritmodel.com/jeti-firmware-updates.aspx

The 1.20 firmware version for the Central Box 200 adds a digital interface function to the existing settings for the output pins. Individual Central Box 200 outputs can now be configured as one of the three modes; classical servo output, digital output or digital input. In the digital output mode, only the logical level 1 or 0 is generated on the port configured this way. The value of this output is reflecting the assigned output channel and its level. If the servo position of the specified receiver channel is lower than 0%, i.e. 1.5ms (the decision limit point can be set by the user using the „Trigger“ parameter), the output is set to permanent log. 0 (i.e. 0V). If the servo position is higher than 0%, log. 1 (i.e. 3.3V) will be generated on the pin. In the digital output mode, no control servo pulses are generated for that particular pin.

The Central Box with the new firmware can also function as an EX Bus Expander. This function can be activated on the Ext1, Ext2 and Ext3 outputs and this will function even if the Central Box is controlled by the PPM signal (Rx1 and Rx2 input). The Central Box transforms the servo positions from the PPM signal to the EX Bus. The Central Box can detect any sensor that can communicate in EX Bus mode and starts the communication with the sensor automatically using EX Bus protocol.

The Graupner’s MC-32 HoTT (Hopping Telemetry Transmission) with 16 control functions, 80 model memories, and integrated Bluetooth module enables any advanced RC pilot to control nearly any model. The use of the Graupner HoTT 2.4 GHz transmission technology ensures high functional reliability through bidirectional communication between transmitter and receiver, with integrated telemetry, voice output via speaker or headphone output, and ultra-fast controller response times. The use of up to 75 frequency hopping channels ensures extreme operating reliability and security from external interference. By using optional sensors and sensor modules, you see and analyze real-time data such as RPM, voltage, current, temperature, and also set warnings in the transmitter based upon the telemetry data. With up to 16 available channels, built-in telemetry with data logging capabilities, and two high contrast LCD displays for programming and telemetry the MC-32 is the obvious choice for anyone who needs a high quality, tray style, 16 channel radio system.

(Full Story)

The time has finally arrived; the Jeti DS-14’s are shipping out! If you haven’t ordered yours, order it now!

(Full Story)

Download the newest update for your Jeti Transmitter here. Includes many new feature updates such as Proportional Control Positions, Digital Trim Function Control, Telemetry Controls, and much more.

(Full Story)

With constant feature updates on Jeti transmitters, an old manual just won’t cut it. We are proud to announce the release of the current manual. Download yours here! Covers Firmware Version 3.0.

(Full Story)

We proudly announce the finalization of FCC Certification on the Jeti Duplex DS-14! We hope to start shipping as soon as next week. If you don’t already have yours, Pre-Order it now!

(Full Story)

Graupner’s new line of telemetry is here! Take a look, everything from Voltage Sensors to Bluetooth Modules!

(Full Story)

Futaba consistently delivers great radios. The 10 channel, telemetry capable, fully programmable and user updateable 10J transmitter is no exception. With fully assignable sticks, switches, knobs and levers, the 10J allows for user control. The telemetry data can be viewed on the backlit LCD screen and audibly reported through headphones. Three buttons and a jog dial make it exceptionally easy to program. It’s light weight, easy to handle and equipped with an astonishing 30 model memory. Since updating is simple, your never have to live with an out of date transmitter.

(Full Story)

The firmware version 3.20 for Duplex EX receivers brings several new features especially for output pins settings. One of them gives the ability to set the digital interface so that it is possible to set serial communication for control of servo channels on one of the outputs of the receivers, while at the same time generating standard servo outputs for connected servos. This setting is especially advantageous in copter models where a serial interface is used for communication between the receiver and the stabilization system that controls the model.

(Full Story)

Say hello to the new line of transmitters from Graupner! Graupner’s HoTT (Hopping Telemetry Transmission) technology supports bi-directional data transmission to give you real-time information directly on your transmitter. With transmitters ranging from 5 to 16 channels there is bound to be one for everyone! Take a closer look to see more of the amazing features Graupner has brought to the table.

(Full Story)