Great starter electric sailplane with easy building and smooth flights.
Buy yours, HERE!
NEW Elite Telemetry Sensor Current/Voltage/Capacity & Voltario T30 12V/10A Touch Switches!
Voltario Telemetry Sensor monitors your Rx Battery Voltage (V), Capacity (mAh), and Current (A)
Voltario T30 combines Touch w/LED (Included), Wireless (R3/RSW) or Mechanical Switch functionality together with telemetry sensor in a single device. Voltario T30 uses advanced technology to reach minimum size and enhanced set of features.
Voltario T30 is designed to turn ON/OFF the electronics in your model. If you use a dedicated receiver battery, the Voltario can be used to directly replace a mechanical RC switch. Specifically in thin glider fuselages or models equipped with a small BEC circuit, the device will offer great benefits like a small size and receiver battery monitoring. The device remembers its last operating state, and if the battery is accidentally disconnected, the Voltario will automatically boot up again as soon as the battery is connected again. JetiBox Monitor/Programmer can be used for programming and live telemetry data display during bench setup and testing.
Learn more, HERE!
BRAND NEW ITEM: Elite Telemetry Sensor Current/Voltage/Capacity & Servo Overload Protection Voltario S30 12V/30A
We’ve got new sensors to help you keep up with all your models and builds.
Voltario S30 is designed for monitoring power consumption of a single servo. It offers additional possibility to set the overcurrent protection shutdown with telemetry alarm if servo is disconnected. JetiBox Monitor/Programmer can be used for programming and live telemetry data display during bench setup and testing.
Voltario Telemetry Sensor monitors your Servo Voltage (V), Capacity (mAh), and Current (A).
Plug the Voltario S30 between receiver output channel and servo of your choosing. Voltario S30 also works fully autonomously as a programmable fuse (this function has to be configured first). To view the live telemetry data you can link the Voltario S30 with the receiver telemetry port.
– Jeti Duplex & Graupner HoTT telemetry support (Current, Voltage, Used Capacity)
– Optional High Current Shutdown with Power Regeneration
– Programmable Overcurrent Protection (0.1A – 20A)
Shutdown Current – you can specify the maximum allowed current before the Voltario shuts down the load. By default, after reaching the shutdown current, it takes approximately 0.5 seconds before the fuse reacts. But the overcurrent shutdown reacts proportionally faster if the current is higher.
Check them out, HERE!
Check Out These No Solder Servo Connectors!
Choose from 2, 4 or 6 Servo Connectors for your next project. No soldering required!
Order yours, HERE!
Our New Hires Are Doing A Great Job!
Our Quality Control department has been doing a great job lately! Not only are they thorough, but they also accept payment in stale bread and sunflower seeds.
Esprit Tech & Jeti USA YouTube Livestream! Episode 6: NEW: Elite Voltario/SFuse Telemetry Batt/Servo Sensors
This week James will be talking our new Elite series devices including the awaited in-line poly fuses and the Voltario S30 sensor and T30 switch. He will dive in to the uses of these new devices along with using the Voltario T30 along with the Jeti Wireless Switch Expander for multiple devices, along with a classroom style discussion on setting up the sequencer in your Jeti transmitter. We have gotten a lot of questions lately on this week’s topics, especially the Sequencer, so you’ll definitely want to tune in this week.
Tune in Thursday, April 2nd at 14:00 EST, HERE!
COVID19 is No Match for Esprit!
Hi, all! This Coronavirus hasn’t wiped us out! We are still answering phones and shipping out orders.
If you’re self-isolating now may be the best opportunity to catch up on your latest build or repair a model or two. We are here to facilitate and assist with your questions.
Enjoy this photo of the latest addition to the Esprit Team (we’ve got 5!). Stay safe and happy flying! 👍😀
Esprit Tech & Jeti USA YouTube Livestream! Episode 5: All About Opale
This week James will be talking about Opale Paramodel’s unique line of products, along with a discussion on paramotor programming and some great video clips of these beautiful machines in flight. We have gotten a lot of interest lately in Opale Paramodels, so you’ll definitely want to tune in this week.
Tune in Thursday, March 19th at 14:00 EST, HERE!
With Jeti REX Assist Receivers, You’re Always In the Know!
Jeti REX Assist receivers allow you to expand the functionality of your system by adding the variometer function. With Jeti system you only pay for features that you will actually use, but you will keep your options open if your needs change.
Variometer function in the Assist receivers requires purchase of the Vario software module through swshop.jetimodel.com. If you are using a DS-12, the transmitter may require the software module for vario be purchased through swshop.jetimodel.com.
Variometer is a system that measures atmospheric pressure and using the obtained data, it calculates the altitude above sea level, airspeed, and the rate of climb as well as the rate of descent. Changes in climb and descent rates are signaled as well. The sensor also alerts you if any alarm setting is exceeded.
Get them, HERE!
Jeti USA and Esprit Tech Livestream Returns March 12, 2020!
We apologize, due to unforeseen circumstances there won’t be a livestream this week.
However, next week James will be talking about the Jeti Main Switch and using the Jeti Wireless Switch Expander for multiple devices, along with a discussion on Logical Switches and his views on the state of the hobby. We have gotten a lot of questions lately on these topics, especially logical switches, so you’ll definitely want to tune in!
Let us know what you’d like to see in future episodes by going HERE!
Tune in, Thursday March 12, 2020 14:00 EST HERE!
