Watch as James takes you on a three-hundred-and-sixty degree tour of the rotational capabilities of the Ditex servos.
REX Assist w/ Satellite Receivers and Central Box
We have gotten several questions regarding the Jeti REX Assist receivers and how to set them up if you are using multiple receivers or a central box. It seemed as something worth addressing. Take a read at this article that Jeti Model posted.
If you plan to use the REX Assist receiver in combination with any additional receiver or Central Box, this article provides you several possibilities of how to connect and set up the devices.
Satellite Receiver Connection:
A satellite receiver (such as R3/RSW) can be connected to the E1 or E2 port on the REX A receiver. In this case, REX A acts as the main receiver with activated flight stabilization and R3/RSW is used as a backup in case signal loss occurs. You can additionally use the Double Path mode in your transmitter.
REX A settings:
| Fail-Safe | Fail-Safe type | Output period | E1 | E2 | Stabilize EX Bus |
| Enabled | Intelligent | 7-20ms | PPM Input | E.g. Sensor | NO |
R3/RSW settings:
| Fail-Safe | Output period | Output type | Receiver mode | PPM mode |
| Disabled | Auto | PPM positive | Normal | Direct |
Central Box Connection:
The REX A receivers are able to generate the EX Bus serial output with up to 16 stabilized servo channels. This stabilized output can be used for airplane models equipped with a Central Box.
REX A settings:
| Fail-Safe | Fail-Safe type | Output period | E1 | E2 | Stabilize EX Bus |
| Enabled | Intelligent | 7-20ms | PPM Input | EX Bus | YES |
R3/RSW or R3 REX 900 * Settings:
| Fail-Safe | Output period | Output type | Receiver mode | PPM mode |
| Disabled | Auto | PPM positive | Normal | Direct |
* The R3 REX 900 (or anything connected to the Rx2 port of Central Box) is only a supplementary device. The Central Box should never switch to this backup receiver while the REX A is functioning correctly. REX A stabilizes the EX Bus output always, even if it does not have signal from the transmitter.
Video Release – A Closer Look: Jeti REX Assist Rx Airplane Installation
Check out this great video by James about REX Assist Receiver installations!
New From Top Model – The Still Racer
The Still Racer is a great little machine to enjoy fast flying. The airfoil used, as well as the concepts applied, give the model excellent flight characteristics and high performance. Thanks to an aerodynamically clean air-frame the model has a surprising shallow glide-slope. The Still racer has a carbon-reinforced fiberglass fuselage, polystyrene/balsa wing, structural elevator with carbon spar and leading edge and therefore is agile and break-resistant enough to be capable of aerobatics, and best part is it will be here soon!
Specifications:
- Wingspan: 1000mm
- Length: 700mm
- Flying Weight: 0,65-0,75kg
- Wing Area: 13,4g/dm2
- Wing Loading: 48,5-56,0g/dm2
- Airfoil: Special
New MKS Carbon Fiber Servo Arms
New to our line of MKS accessories are the Carbon Fiber Servo Arms. With special fit for your MKS servos, these strong and lightweight arms are just what you need! The available sizes are: 4.5″ offset arm; 4″ full arm; 2″ half arm; and 1.5″ half arm. Check them out online for more details like hub size.
Video Release – A Closer Look: Jeti REX Assist 2.4GHz Receiver Programming
The REX Assist receivers enhance the REX series of receivers and extend it with the intelligent flight stabilization feature, which is designed for airplane models and multicopters. This stabilization works in all three axes of the model and facilitates flying in windy or otherwise challenging conditions.
Features:
- – Up to 16 Stabilized Individual Channels
- – Available Telemetry: Rx Voltage, Signal Quality/Strength, G-Force, Attitude Orientation
- – Different Multicopter Types, from Tricopters to Octocopters
- – Up to 3 Adjustable Flight Modes, Options for Stabilizing the Horizon and Altitude – In-flight Gyro Gain Tuning Using Available Channels
- – Latest 3-axis Gyroscope, 3-Axis Accelerometer and Barometric Altimeter
- – Wireless Transmitter programming and PC Support
Registration Is Open
Hey guys! We just wanted to let everyone know that registration is open for the 2018 Jeti Flight Fest in Sebastian, Florida. You can find all the important information on RC Flight Deck’s website. There is a two-part registration process we wanted to explain.
First – Head over to RC Flight Deck to register your pilot information. Here we have 3 choices for registration day, so make sure you pick the one that reflects the date or dates you plan on attending.
Second – Payment. There are two options for a payment method. If you wish to pay cash, you can pay at the door. Please note: NO CREDIT/DEBIT cards will be accepted at the door. If you are paying with a credit/debit card, head on over to our site and purchase your registration.
If you have any questions reach out to us at support@esprittech.com.
Hope to see you there! Happy Flying!
Video Release – A Closer Look: Jeti Ditex Telemetry Servos (Center Programming)
Get a closer look at the brand new Jeti Ditex servos. James takes you through some basic settings on these fully programmable servos!
Studio Time!
We are back in the studio and we are so excited to share our new video with you guys! If you have are curious about the new Jeti Assist receivers, this is a must watch!
Subscribe to the YouTube Channel to get all the latest video releases!
It’s Official! The DS-24s are FCC Certified!
We would like to announce that on February 1st. at 15:00 EST the Federal Communication Commission and Industry Canada, Granted Equipment Authorization (FCC), and Certificate of Acceptance (IC) to Jeti USA (Esprit Model Inc.) for the Duplex DS-24 Radio System.
After spending hundreds of hours and thousands of dollars we can say that this was our most complicated, expensive, extensive, and exciting project to date. We cannot express our gratitude enough to all of the people who believed in us and contributed to bringing one of the finest and most advanced radio systems to the American market.
We are expecting that we will start shipping DS-24 next Monday.
