Jeti Telemetry Sensor Fuel Flow MFlow2

On By hajek

Jeti Telemetry Fuel Flow MFlow2 T and G EX digital flow sensors measure the true fuel flow of gasoline or turbine jet fuel.

The Jeti MFlow2 EX sensor allows you to set your “Low/High Fuel” alarms and gives you accurate reading of fuel consumption. Also allows you to setup remote commands for transmitter wireless value reset. Turbine flow sensor is equipped with Festo 4mm fuel line connectors. Gasoline sensor can be used with Medium 3/32″ (2.4mm), Large 1/8″ (3.2mm) ID fuel tubing.

Through the Duplex 2.4GHz system and either a JetiBox Profi or Jeti Transmitter you can monitor your data and alarm conditions in real time. Make sure that in the Devices folder of your SD card you have a configuration file “MFLOW2.bin”. 

Flow Rate: 20 to 800 ml/minute with 2% resolution
Operational Voltage: 5V to 8.4V
Dimensions: 75mm x 40mm x 30mm
Weight: 40g
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi

Shop Now!

***NEW*** Servo Tester, Driver & Cycler w/Centering LED MX 8340

On By hajek

Servo Driver, Tester and Cycler controls your speed controller or tests any of your servos by providing a variable pulse that simulates the output signal of the receiver. It comes equipped with centering LED light that illuminates when servo is precisely centered. 

Servo Driver can also run your electric power systems without needing to use of your RC system. Servo driver can be powered by the BEC in your speed control or by any 4.8-6V battery pack.

Features:
– Run your electric motor without your radio
– Test your servos without your radio
– Use to match transmitter throttle to the speed control
– Know what receiver pulse width your motors starts
– Know what receiver pulse width your motor is fully on

Click Here For More Info

Vitaprop Carbon Fiber Folding Propellers

On By hajek

Vitaprop Carbon Fiber folding propellers were specifically designed for high performance electric motors.

Propellers feature high Carbon Fiber content for light weight, professionally laid CF cloth for extreme torsion rigidity and aluminum shoulder inserts for extreme durability.

Made of carbon-fiber. Sold in pairs.

Shop Now

Jeti Mezon Pro Brushless Electronic Speed Controller (ESC) with Telemetry

On By hajek

The Mezon Pro Brushless Electronic Speed Controller (ESC) with Telemetry, Device Explorer Integration and Wireless Transmitter Programming.

Jeti Mezon Pro 40 LMR (Sailplane) $129.00
Jeti Mezon Pro 70 LMR (Sailplane) $279.00
Jeti Mezon Pro 50 12S $139.00
Jeti Mezon Pro 80 12S $289.00
Jeti Mezon Pro 55 Opto 12S $119.00
Jeti Mezon Pro 85 Opto 12S $269.00

HEPF Hausmesse 2018

On By hajek

Hausmesse 2018 held at Dorf 69, 6342 Niederndorf, Tirol, Austria.

https://www.hepf.at/

Not all of us have the ability to attend flying events all around the world. However, we can share them here. The Hausmesse 2018 event looks amazing. So many talented pilots flying together and sharing their love for the sport with us. Check out these cool photos and videos from Facebook below.

https://www.facebook.com/hepf.at/photos/gm.2355616217997953/1994767933897545/?type=3&theater

https://www.facebook.com/hepf.at/photos/a.204894002884956/2291351324239203/?type=3&theater

https://www.facebook.com/hepf.at/photos/pcb.2291235954250740/2291230090917993/?type=3&theater

https://www.facebook.com/hepf.at/photos/pcb.2291235954250740/2291229827584686/?type=3&theater

https://www.facebook.com/hepf.at/photos/pcb.2291235954250740/2291230377584631/?type=3&theater

https://www.facebook.com/hepf.at/photos/pcb.2291235954250740/2291230440917958/?type=3&theater

https://www.facebook.com/jetimodel/videos/2182155472052061/

https://www.facebook.com/jetimodel/videos/552872278490392/

Jeti Telemetry Sensor Hall Effect Magnetic ON/OFF Position

On By hajek

Our new Magnetic ON/OFF Position Sensor will allow you to trigger events based on the True/False signal sent to your Jeti receiver. This is especially important in applications like gear doors, Up and Go systems for sailplanes, and scale features like opening canopies or gear doors. You will install the magnet on the moving side of your opening and the sensor on the fixed side; allowing you to know when it is closed or open. This signal can then be used in logical switching to prevent accidents from occurring. Imagine a safety lockout that prevents your gear from raising/lowering unless the doors are opened first.

Multiple Position Sensors can be linked in a serial configuration and sent to a single input to signal a True/False condition for a set of doors. A True signal is only achieved when all of the sensors are in agreement.

Gernot Bruckmann at Jet Power Event

On By hajek

The 2018 JetPower Event in Donauwörth-Genderkingen is less than 24 hours away. Esprit Model is proudly cheering on Gernot Bruckmann and other fellow pilots as they compete this weekend.  Looks like a fun filled weekend is ahead for all of them. 

https://jetpowerevent.com/en/

 

Here are just a few posts from Gernot as he prepares. Follow him on Facebook. facebook.com/…rnot/posts/1997939820249214