EM Blog

We’ve got new sensors to help you keep up with all your models and builds.

Voltario S30 is designed for monitoring power consumption of a single servo. It offers additional possibility to set the overcurrent protection shutdown with telemetry alarm if servo is disconnected. JetiBox Monitor/Programmer can be used for programming and live telemetry data display during bench setup and testing.

Voltario Telemetry Sensor monitors your Servo Voltage (V), Capacity (mAh), and Current (A).

Plug the Voltario S30 between receiver output channel and servo of your choosing. Voltario S30 also works fully autonomously as a programmable fuse (this function has to be configured first). To view the live telemetry data you can link the Voltario S30 with the receiver telemetry port.

– Jeti Duplex & Graupner HoTT telemetry support (Current, Voltage, Used Capacity)
– Optional High Current Shutdown with Power Regeneration
– Programmable Overcurrent Protection (0.1A – 20A)

Shutdown Current – you can specify the maximum allowed current before the Voltario shuts down the load. By default, after reaching the shutdown current, it takes approximately 0.5 seconds before the fuse reacts. But the overcurrent shutdown reacts proportionally faster if the current is higher.

Check them out, HERE!

• 

• 

• 

Choose from 2, 4 or 6 Servo Connectors for your next project. No soldering required!

Order yours, HERE!

• 

• 

• 

This week James will be talking our new Elite series devices including the awaited in-line poly fuses and the Voltario S30 sensor and T30 switch. He will dive in to the uses of these new devices along with using the Voltario T30 along with the Jeti Wireless Switch Expander for multiple devices, along with a classroom style discussion on setting up the sequencer in your Jeti transmitter. We have gotten a lot of questions lately on this week’s topics, especially the Sequencer, so you’ll definitely want to tune in this week.

Tune in Thursday, April 2nd at 14:00 EST, HERE!

This week James will be talking about Opale Paramodel’s unique line of products, along with a discussion on paramotor programming and some great video clips of these beautiful machines in flight.   We have gotten a lot of interest lately in Opale Paramodels, so you’ll definitely want to tune in this week.

Tune in Thursday, March 19th at 14:00 EST, HERE!

We apologize, due to unforeseen circumstances there won’t be a livestream this week.

However, next week James will be talking about the Jeti Main Switch and using the Jeti Wireless Switch Expander for multiple devices, along with a discussion on Logical Switches and his views on the state of the hobby. We have gotten a lot of questions lately on these topics, especially logical switches, so you’ll definitely want to tune in!

Let us know what you’d like to see in future episodes by going HERE!

Tune in, Thursday March 12, 2020 14:00 EST HERE!

This week James will be talking about Jeti Central Box power and signal distribution devices and doing some live setup examples.  He will cover multiple applications for the Central Boxes and when you should or shouldn’t choose to add one to your model.  He will also clear up a couple of issues from episode one of our live stream on Assist receivers.   If you are on the fence about purchasing one of these great products or are having trouble with your own Assist setup, you’ll definitely want to tune in this week.

Tune in Thursday 2pm EST, HERE!