Multiple Firmware Updates Just Released
Firmware updates have just been released for many different Esprit Elite products. Read below to learn what is new and head over to the MAV Manager to update your device.
Find the entire line of elite products here.
Elite AMS Competition Altitude Motor Switch, Variometer & Altimeter w/Telemetry
- AMS RELEASE NOTES: VERSION 1.07
- PowerBox P2Bus telemetry support has been added. Available telemetry values: Altitude, pressure, temperature, throttle output, off-altitude…
- Configurable telemetry slots in S.Bus2 telemetry mode. Use the MAV Manager software to change the configuration. After changing the slot range please choose the “VARIO-1672” sensor type on the appropriate slot in your Futaba transmitter.
- Configurable telemetry slots in Multiplex MSB telemetry mode. Use the MAV Manager software to change the configuration.
- In the RC-E7 mode you can now change the shutdown altitude. Default shutdown altitude is 120m
- PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.
Elite Falcon ESC
- FALCON/IBEX ESC RELEASE NOTES: VERSION 1.10
- Improved on-the-fly startups (When the propeller is spinning).
- Optimized PC configuration.
Elite EX5 Serial Bus & Servo Channel Expander
- EX5 RELEASE NOTES: VERSION 1.04
- Improved compatibility with JETI EX Bus 24-channel mode.
- Added PowerBox P2Bus support on Rx1/Rx2 inputs, including telemetry.
- Added stabilization gain tuning. Using spare Bus channels, it allows you to assign up to 3 channels to control the stabilization gains of each model axis during flight. After you assign the channel operated e. g. by a potentiometer, the behavior will be similar to a standard gyro:
- Potentiometer in the middle (0% ~ 1.5ms) effectively disables the stabilization since all gains will be set to zero.
- Potentiometer to the left (< 1.5ms) activates the “Heading Hold” mode. o Potentiometer to the right (> 1.5ms) activates the “Normal” mode.
Elite SE4 Servo Channel Expander Serial Bus to PWM
- SE4 RELEASE NOTES: VERSION 1.03
- Improved compatibility with JETI EX Bus 24-channel mode (in connection with EX5, SE6 or additional SE4 devices)
- Added PowerBox P2Bus support on the Rx input, including telemetry (voltage/temperature).
- PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.
Elite SE6 Servo Channel Expander Serial Bus to PWM
- SE6 RELEASE NOTES: VERSION 1.03
- Improved compatibility with JETI EX Bus 24-channel mode.
- Added PowerBox P2Bus support on the Rx input, including telemetry (voltage/temperature).
- PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.
Elite Telemetry Sensor High Speed GPS
- GPS LOGGER RELEASE NOTES: VERSION 1.03
- Configurable telemetry slots in S.Bus2 telemetry mode. Use the MAV Manager software to change the configuration. Available slots: 8 – 15, 16 – 23, 24 – 31.
- Configurable telemetry slots in Multiplex MSB telemetry mode. Use the MAV Manager software to change the configuration.
- PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.
Elite Telemetry Sensor Micro Variometer & Altimeter
- MICROVARIO RELEASE NOTES: VERSION 1.07
- PowerBox P2Bus telemetry support has been added. Available telemetry values: Altitude, pressure, temperature.
- Configurable telemetry slots in S.Bus2 telemetry mode. Use the MAV Manager software to change the configuration. After changing the slot range please choose the “VARIO-1672” sensor type on the appropriate slot in your Futaba transmitter.
- Configurable telemetry slots in Multiplex MSB telemetry mode. Use the MAV Manager software to change the configuration.
- PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.
Elite Telemetry Sensor Micro Temperature T125
- T125(ID) RELEASE NOTES: VERSION 1.03
- PowerBox P2Bus telemetry support has been added.
- Configurable telemetry slots in S.Bus2 telemetry mode. Use the MAV Manager software to change the configuration. After changing the slot number please choose the “T125” sensor type on the appropriate slot in your Futaba transmitter.
- PC Configuration support using the MAV Manager software has been implemented. Use MAV Manager version 1.6.0 or later.
