Easy 3-Step Process of Designing 2500W Power Package Using Jeti System
Easy 3-Step Process of Designing 2500W Power Package Using Jeti System
Introducing the brand new 180mph (290 km/h) addition to Esprit Tech’s Demo fleet. The Yuri Virchenko’s full composite X-Plus Hotliner/Pylon Racer combined with direct drive Neu 1415/3D motor, Jeti 3300 6S battery, MKS HV6130 digital servos and new Jeti Mezon Pro 80 programmable ESC which gives you transmitter wireless programming capabilities and full telemetry with instant data logging. This will give the thrill that we have been looking for.
Our Easy 3-Step Process:
1. Install Jeti Equipment
2. Turn On, Look at the Data
3. Get a Cold One
Opale Power 2.7/3.67m Paramotor at Beautiful Greg Arnette’s Area 51 RC Flying Field
Designed with the easy handling that you have come to expect from an Opale single skin wing, the Power 2.7 is naturally gifted when it comes to dancing with the wind. During the first soaring flights, facing a 35km/h wind and lightly ballasted, we were very surprised by the high efficiency of this wing. The wing cuts lines through the wind like a sushi chef cutting a Maki roll with his knife. Under power, in combination with a Backpack L and a Lucas Pilot, the wing did not flinch and the handling was just as precise.
Wingspan : 144.5″ (3670mm)
Wing area : 2.7 sg.m
Wing cells : 27
Aspect ratio : 5
Suggested power : 900W – 1000W (5000 6S)
Max propeller size : 12″ – 13″ (305mm – 330mm)
Recommended flying weight : 14 lbs. (6350g)
Visit our website link below to purchase yours today!
http://www.espritmodel.com/paramotor-power-2-7-3-67m-combo-package.aspx
Jets Over Kentucky 2018
Mephisto, Cortex, Jeti & Markus Rummer at Weston Park 2018
Markus Rummer with CARF’s Trust Vectoring Mephisto 3D Aerobatic Jet, BavarianDemon Cortex Pro Stabilization and Jeti DS-24 Radio System performs mind blowing 3D aerobatic routine at the Weston Park 2018 RC show in UK.
Jeti Model New Mezon Pro 50 ESCs with Full Device Explorer Integration, Wireless Programming & Telemetry!!!
Looking For Power?
We have got some set-up suggestions! Check out what you can do with the new Esprit Motors!
E105/20-135 3D HD Outrunner Brushless Motor
E105/20 HD Series
|
105/20 – 135
|
---|---|
Kv (rpm/V) | 135 |
Max Power (W) | 8500W |
Max Amp (15sec) | 180A |
Max Efficiency | 95% |
Io (No load A) | 4.4A |
Rm (Resistance) | 0.0218Ohm |
Shaft Diameter | 10mm |
Gearbox | N/A |
Motor Diameter | 119mm |
Motor Length | 83.5mm |
Motor Weight | 1850g |
Built in Fan | Yes |
Max Rpm | 7,000 |
Poles/Stator | 28/24 |
Case | Outrunner |
ESC Timing | 20-25 deg |
ESC Switching Freq. | 8kHz |
Model type | Motor | Controller | Battery | Prop | Power/A/RPM |
---|---|---|---|---|---|
Aerobatic/3D | 105/20-135 | Jeti Spin Pro 125 | 7000 12S Li-poly | 30×10 Fiala | 4350W/98A/4900 |
Scale 45 lbs./20kg | 105/20-135 | Jeti Spin Pro 200 | 7000 12S Li-poly | 32×10 Fiala | 5350W/120A/4700 |
Aerobatic 100-120cc | 105/20-135 | Jeti Spin Pro 200 | 7000 14S Li-poly | 28×12 Fiala | 6750W/130A/5500 |
E105/30-125 3D HD Outrunner Brushelss Motor
E105/30 HD Series
|
105/30 – 125
|
---|---|
Kv (rpm/V) | 125 |
Max Power (W) | 9800W |
Max Amp (15sec) | 200A |
Max Efficiency | 95% |
Io (No load A) | 5.7A |
Rm (Resistance) | 0.0161Ohm |
Shaft Diameter | 10mm |
Gearbox | N/A |
Motor Diameter | 119mm |
Motor Length | 93.5mm |
Motor Weight | 2400g |
Built in Fan | Yes |
Max Rpm | 7,000 |
Poles/Stator | 28/24 |
Case | Outrunner |
ESC Timing | 20-25 deg |
ESC Switching Freq. | 8kHz |
Model type | Motor | Controller | Battery | Prop | Power/A/RPM |
---|---|---|---|---|---|
Scale/Sport | 105/30-125 | Jeti Spin Pro 200 | 7000 12S Li-poly | 32×12 Fiala | 5350W/120A/4400 |
Scale 66 lbs./30kg | 105/30-125 | Jeti Spin Pro 200 | 7000 14S Li-poly | 32×10 Fiala | 7000W/135A/5150 |
Scale 77 lbs./35kg | 105/30-125 | Jeti Spin Pro 200 | 7000 14S Li-poly | 32×12 Fiala | 7350W/142A/4850 |
Aerobatic 150-200cc | 105/30-125 | Jeti Spin Pro 300 | 7000 15S Li-poly | 32×12 Fiala | 8900W/160A/5000 |
Axi Extreme 3D Motors with Jeti Integration
Now-a-days, everything is integrated, and as simply as possible. You can complete your banking from your living room, share your photos anywhere from the cloud, and open your front door from your mobile phone. Why not integrate your flight systems in your airplane? Access your much needed Telemetry data directly on your Jeti Transmitter without the need for additional electronics with the Axi 3D Extreme Motors! With hardened steel shafts, built in prop adapters, integrated cooling fans and pre-installed Jeti telemetry sensors this line of motors represents the highest level of quality.
Steven Installation In Fast Motion
RC Skydiver Steven install leaving you feeling a bit grounded? Well, worry no more. Take a look at this amazing video posted by Opale Parachutes. In combination with the manual, this video will show you each step from start to finish and get you up in the air in no time!
Snapshots From Our Customers!
Thanks to our customer Gerardas for these awesome shots of his “old-school, scratch-built” plane. According to Gerardas, this plane “Flies like a dream and attracts lots of attention on a field.” He equipped it with an Axi V2 Brushless Motor, Jeti Pro Power 2700mAh battery, and flies it on a Graupner receiver and Mz-12 Transmitter.
Great build Gerardas, we love it!