Markus Rummer with CARF’s Trust Vectoring Mephisto 3D Aerobatic Jet, BavarianDemon Cortex Pro Stabilization and Jeti DS-24 Radio System performs mind blowing 3D aerobatic routine at the Weston Park 2018 RC show in UK.
Jeti Model New Mezon Pro 50 ESCs with Full Device Explorer Integration, Wireless Programming & Telemetry!!!
Looking For Power?
We have got some set-up suggestions! Check out what you can do with the new Esprit Motors!
E105/20-135 3D HD Outrunner Brushless Motor
|
E105/20 HD Series
|
105/20 – 135
|
|---|---|
| Kv (rpm/V) | 135 |
| Max Power (W) | 8500W |
| Max Amp (15sec) | 180A |
| Max Efficiency | 95% |
| Io (No load A) | 4.4A |
| Rm (Resistance) | 0.0218Ohm |
| Shaft Diameter | 10mm |
| Gearbox | N/A |
| Motor Diameter | 119mm |
| Motor Length | 83.5mm |
| Motor Weight | 1850g |
| Built in Fan | Yes |
| Max Rpm | 7,000 |
| Poles/Stator | 28/24 |
| Case | Outrunner |
| ESC Timing | 20-25 deg |
| ESC Switching Freq. | 8kHz |
| Model type | Motor | Controller | Battery | Prop | Power/A/RPM |
|---|---|---|---|---|---|
| Aerobatic/3D | 105/20-135 | Jeti Spin Pro 125 | 7000 12S Li-poly | 30×10 Fiala | 4350W/98A/4900 |
| Scale 45 lbs./20kg | 105/20-135 | Jeti Spin Pro 200 | 7000 12S Li-poly | 32×10 Fiala | 5350W/120A/4700 |
| Aerobatic 100-120cc | 105/20-135 | Jeti Spin Pro 200 | 7000 14S Li-poly | 28×12 Fiala | 6750W/130A/5500 |
E105/30-125 3D HD Outrunner Brushelss Motor
|
E105/30 HD Series
|
105/30 – 125
|
|---|---|
| Kv (rpm/V) | 125 |
| Max Power (W) | 9800W |
| Max Amp (15sec) | 200A |
| Max Efficiency | 95% |
| Io (No load A) | 5.7A |
| Rm (Resistance) | 0.0161Ohm |
| Shaft Diameter | 10mm |
| Gearbox | N/A |
| Motor Diameter | 119mm |
| Motor Length | 93.5mm |
| Motor Weight | 2400g |
| Built in Fan | Yes |
| Max Rpm | 7,000 |
| Poles/Stator | 28/24 |
| Case | Outrunner |
| ESC Timing | 20-25 deg |
| ESC Switching Freq. | 8kHz |
| Model type | Motor | Controller | Battery | Prop | Power/A/RPM |
|---|---|---|---|---|---|
| Scale/Sport | 105/30-125 | Jeti Spin Pro 200 | 7000 12S Li-poly | 32×12 Fiala | 5350W/120A/4400 |
| Scale 66 lbs./30kg | 105/30-125 | Jeti Spin Pro 200 | 7000 14S Li-poly | 32×10 Fiala | 7000W/135A/5150 |
| Scale 77 lbs./35kg | 105/30-125 | Jeti Spin Pro 200 | 7000 14S Li-poly | 32×12 Fiala | 7350W/142A/4850 |
| Aerobatic 150-200cc | 105/30-125 | Jeti Spin Pro 300 | 7000 15S Li-poly | 32×12 Fiala | 8900W/160A/5000 |
Axi Extreme 3D Motors with Jeti Integration
Now-a-days, everything is integrated, and as simply as possible. You can complete your banking from your living room, share your photos anywhere from the cloud, and open your front door from your mobile phone. Why not integrate your flight systems in your airplane? Access your much needed Telemetry data directly on your Jeti Transmitter without the need for additional electronics with the Axi 3D Extreme Motors! With hardened steel shafts, built in prop adapters, integrated cooling fans and pre-installed Jeti telemetry sensors this line of motors represents the highest level of quality.
Steven Installation In Fast Motion
RC Skydiver Steven install leaving you feeling a bit grounded? Well, worry no more. Take a look at this amazing video posted by Opale Parachutes. In combination with the manual, this video will show you each step from start to finish and get you up in the air in no time!
Snapshots From Our Customers!
Thanks to our customer Gerardas for these awesome shots of his “old-school, scratch-built” plane. According to Gerardas, this plane “Flies like a dream and attracts lots of attention on a field.” He equipped it with an Axi V2 Brushless Motor, Jeti Pro Power 2700mAh battery, and flies it on a Graupner receiver and Mz-12 Transmitter.
Great build Gerardas, we love it!
Joe Nall 2018
As some of you may already know, due to severe weather conditions, Joe Nall 2018 has been officially canceled. Since the event is closed, obviously we will not be taking off to Woodruff, South Carolina this year. We do however look forward to seeing you next year.
Thank you,
Jeti USA and Esprit Tech
*Photo Credit – Stansphotos
New From Top Model – The Element 3.5
Designed and manufactured in the Czech Republic, the Element is a perfect pick for thermal flying. The Element’s wings are built with carbon fiber wing spars and a carbon fiber leading edge, giving it the perfect combination of strength and stiffness. It’s thin wing airfoil and low weight help provide excellent flight qualities. With a long fuselage, the Element will soar nice and steady, with little effort.
Specifications:
- Wing Span: 3500 mm
- Length: 1800 mm
- Weight: 2,1-2,3 kg
- Airfoil: AG
- Wing Loading: 27,1 – 29,7 g/dm2
Features:
- Lightweight gel-coated, fiberglass fuselage and canopy
- Three-piece balsa wing with carbon fiber wing joiner, leading edges and wing spar
- Re-moveable balsa tail surfaces
Come Roast With Us!
We are excited to announce our very first Jeti Fight Club Member Party! Fight Club Members are invited to our Joe Nall Pig Roasting Party Thursday, May 17th, at our show central tent.
Not a member yet? No problem! Sign up here for all the benefits.
DELIVERY!!!
Headed to Joe Nall? So are we! Save on shipping and have us deliver your package to Joe Nall! Place your order by midnight (EST) Sunday, May 13th, and select the Joe Nall shipping option under custom shipping. We will pack it and add it to our truck. Just stop by and see us at show center between Tuesday and Friday to pick up your package.
