Category: Accessories

Servo Driver, Tester and Cycler controls your speed controller or tests any of your servos by providing a variable pulse that simulates the output signal of the receiver. It comes equipped with centering LED light that illuminates when servo is precisely centered. 

Servo Driver can also run your electric power systems without needing to use of your RC system. Servo driver can be powered by the BEC in your speed control or by any 4.8-6V battery pack.

Features:
– Run your electric motor without your radio
– Test your servos without your radio
– Use to match transmitter throttle to the speed control
– Know what receiver pulse width your motors starts
– Know what receiver pulse width your motor is fully on

Click Here For More Info

Our new Magnetic ON/OFF Position Sensor will allow you to trigger events based on the True/False signal sent to your Jeti receiver. This is especially important in applications like gear doors, Up and Go systems for sailplanes, and scale features like opening canopies or gear doors. You will install the magnet on the moving side of your opening and the sensor on the fixed side; allowing you to know when it is closed or open. This signal can then be used in logical switching to prevent accidents from occurring. Imagine a safety lockout that prevents your gear from raising/lowering unless the doors are opened first.

Multiple Position Sensors can be linked in a serial configuration and sent to a single input to signal a True/False condition for a set of doors. A True signal is only achieved when all of the sensors are in agreement.

Easy 3-Step Process of Designing 2500W Power Package Using Jeti System

Introducing the brand new 180mph (290 km/h) addition to Esprit Tech’s Demo fleet. The Yuri Virchenko’s full composite X-Plus Hotliner/Pylon Racer combined with direct drive Neu 1415/3D motor, Jeti 3300 6S battery, MKS HV6130 digital servos and new Jeti Mezon Pro 80 programmable ESC which gives you transmitter wireless programming capabilities and full telemetry with instant data logging. This will give the thrill that we have been looking for.

Our Easy 3-Step Process:
1. Install Jeti Equipment
2. Turn On, Look at the Data
3. Get a Cold One