Year: 2020

Store Display, Brand NEW Grafas MAXi 3.5 electric sailplane battery and receiver ready. Model has been expertly built at our shop for local competition.

Condition of item: Store Display, Never Flown, Brand NEW

One of the most impressive European made sailplanes that we have ever seen, the new Grafas MAXi 3.5E flies as good as it looks. The new Grafas MAXi 3.5E was designed as the latest and largest addition to the ever-growing family of hand-made electric sailplanes by TopModel CZ. Gentle, smooth, and very long flights are the standards for this beauty. The careful use of composites with competition balsa, creates a good light structure that will hold its shape for a long time. The synergy of low weight and strong structure is very unusual in a production sailplane and can only be achieved with careful attention to design and construction.

The entire model is constructed using free-flight techniques. Top Model uses the latest construction techniques such as CNC milling and laser cutting. The wings as well as horizontal tail are all balsa built-up with Carbon Fiber main spare and leading edge. The fuselage is gel-coated fiberglass with white finish. Whole model is covered with Ultracote. All control surfaces are hinged with adhesive tape. This fully built sailplane needs only basic assembly and motor/radio installation. The 3-piece wing and full flying stabilizer are each easily removable for transport and storage. Each part is carefully hand-crafted with meticulous attention to detail. Value is simply incredible.

Get it, HERE!

• 

• 

• 

The Elite Sliding Touch Switch is an electronic device that can be used to turn ON and OFF the electronics in your RC model. It can replace any electronic or mechanical switch that uses a logical voltage level on its output. Features configurable touch sensitivity, last power-on status is stored in the internal memory, and very low standby current.

You do not need any additional tools to power up your model (such as a magnet in the case of a magnetic switch). The advantage of an electronic switch is that it offers a virtual unlimited ON/OFF cycle, unlike mechanically operated switches.

The faceplate contains an integrated LED to indicate the ON/OFF status of the switch. Should any of the devices become disconnected from the switch, the device will stay ON and switch will remember its last state.

Easy installation, place the Touch Switch anywhere on the aircraft fuselage – either outside or inside the fuselage. Please note, that if you install the switch inside the fuselage, the maximum allowed surface thickness must not exceed 1/8″ (3mm) and the material must be non-conductive (plywood, fiberglass).

Operational Current: 12mA
Operational Voltage: 4V to 16.8V
Dimensions: 42mm x 16mm x 8mm
Weight: 3g

Get yours, HERE!

• 

• 

Compatible with the following devices:

• 

• 

The Emcotec D-Sub power connector sets have been designed using only the highest quality automotive grade, heavy duty components (Made In Germany) with addition of integrated housing and reverse polarity protection.

Simply solder your wing/tail/fuselage power connections to the power leads and instantly enjoy secure connection. Replace your existing, or install to your brand new airplane Emcotec D-Sub Heavy Duty power connectors and ensure secure, self aligning, polarity protected power connection.

• Specifications/Features:
• Designed with built-in reverse polarity protection
• Heavy Duty, locking, vibration safe connection
• Up to 40A continues current
• Easy installation due compact design

Get yours, HERE!

• 

• 

• 

Are you looking for your dream sailplane? We’ve got our Store Display Pulsars all updated and ready to ship to you!

The Pulsar 2.5E Pro REF is the latest and most advanced addition to the ever-growing Pulsar family of hand-made electric sailplanes.

The fuselage is made of gel-coated 2.4GHz friendly fiberglass/Kevlar with carbon fiber tapered boom and removable carbon fiber canopy. The three piece wing and 2-piece conventional tail are each easily removable for transport and storage. The rudder as well as elevator servos install in the vertical fin. The careful use of composites, combined with an underlying wood structure in the wing, ensures a good light structure that will hold its shape for a long time. This is an extremely light, high performance model.

Get yours, HERE!

• 

• 

• 

• 

We love building the beautiful Pulsar Sailplanes not only because of how well they fly but also because of just how vibrant their colors are!

We carry Blue, Red, Yellow and combination colors, too.

Order yours, HERE.

• 

• 

• 

• 

This week James will be talking about a couple of exciting new products coming into the store from Jeti and ToolkitRC. He will be explaining the features of the new ToolkitRC chargers and showing us the new DS-12 Carbon radios currently on preorder status. He will also do a demonstration of wired buddy boxing using the Jeti DS-12 transmitter as a teacher to other brands of radios. If you are the lone Jeti flyer at your field and want to be able to buddy box fellow club members, or you’ve been on the fence about a new transmitter or charger, make sure to tune in to this episode.

Tune in Thursday, May 20th at 14:00 EST, HERE!

We are glad to be able to bring these excellent products to our customers.

ToolkitRC has developed a number of best-selling balance management charging products, and the industry’s first touch color screen balance charger. Today, a variety of RC industry utilities have been integrated to launch the company’s first toolchain, the M8. Based on the balanced charger, the M8 integrates functions such as electric display, power meter and signal tester.

Learn more and get your own, HERE!

The Jeti V-Cable is a dual input battery isolator. The Jeti Mini V-Cable isolates two power sources (Two Receiver Batteries/Backup Battery and BEC) keeping your system operational if one of the power sources accidentally fails.

The V-Cable is designed for two independent 5V – 8.4V power inputs and supports up to 4A continuous current or 12A burst current for your connected devices. This unit is most suitable for light weight models, like electric or thermal duration sailplanes, in which you want to run two separate power sources. Please note that V-Cable does not include a regulator, output voltage is equal to the larger of two input voltages.

Get it, HERE!

• 

•