Jeti customer Evan Sayres has taken on an amazing new project in this Bell Invictus 360. Starting with a 3D printed plug, Evan will eventually be molding the fuselage for a true scale appearance.
The model will feature dual motors, a scratch built set of mechanics, and a Vario fenestron tail setup. The finished model will be controlled by Jeti Duplex radio gear.
We can’t wait to see if Evan meets his goal of flying his model before Bell launches the full scale release.
After receiving numerous questions regarding getting extra channels while using Jeti Central Box 210/220 we have come up with elegant configuration that uses power from CB210/220 servo port 9/10 for Central Box 100. This way you can have up to 20 high power servos connected to the system and still have full battery telemetry & redundancy.
If you connect Telemetry to the CB100 and use CB100 only for noncritical functions (Gyro, Lights, Airbrakes…) you can get away with a single power lead and go up to 22 servos.
Get yours, HERE!
With its fiberglass fuselage and its carbon fiber reinforced, obecchi sheeted foam wings the Ventus 2cx can handle full day of soaring as well as limited aerobatic routine. The careful use of composites with competition balsa, creates a good light structure that will hold its shape for a long time. Finished with the new Front Electric Sustainer/Self-Launcher (FES) Elite series motor.
The FES motor is the culmination of years spent designing and testing in specialized environments. Motors feature hardened steel shafts, built in fans, a large radial bearing designed to carry the load placed on the open end of the rotor, and an enclosed shaft extension that includes its own bearing. We feel that these motors are the perfect solution for your electric powered scale sailplanes. These features, combined with an easy to maintain and repair design, promise years of worry free use.
Get your Ventus, HERE!
Look at this beauty!
Store Display, Brand NEW Prelude REF 2.5E sailplane receiver ready. Model has been expertly built at our shop for store display. Recommended battery: 2700 3S
One of the most impressive European made sailplanes that we have ever seen, the Prelude 2.5E REF flies as good as it looks. Gentle, smooth, and very long flights are the standards for this beauty. The careful use of composites with competition balsa, creates a good light structure that will hold its shape for a long time.
(1) Prelude REF 2.5E $315.00
(1) AXi 2820/14 V2 Sailplane brushless motor $95.00
(1) Jeti Advance 40 Pro SB ESC $79.00
(2) Hitec HS-5065MG servo (flaps) $66.00
(2) Hitec D85MG servo (elevator, rudder) $78.00
(1) BB Turbo 40/5/8mm folding spinner $23.00
(1) Aeronaut 14×8 folding propeller $15.00
(2) Servo extension $8.00
(1) Deans connector $3.00
(1) Velcro Strap $3.00
(1) Servo Frame $20.00
(1) Building Services $250.00
Get yours, HERE!