Main Switch 200 Now Available For Pre-Order

On By hajek

Pre-Order your Main Switch 200 now. Main Switch is an electronic primary switch designed for switching of the main power supply (Main Battery) for your RC model. It adds an element of safety when handling the model, without the need to physically disconnection of the main battery pack. The advantage of an electronic switch is that it offers a virtual unlimited On/Off cycles, unlike mechanically operated switches. The Main Switch prevents the connectors from sparking when connecting the batteries, in fact it also replaces Anti-Spark connectors.  Two versions are offered; Main Switch 200A with Magnetic Switch, or Main Switch 200 with R3/Wireless Switch.

(Full Story)

Jeti Press Release

On By hajek

Jeti USA Press Release!!!

Introducing “Limited Edition” Red Racer & Black Phoenix, Jeti Duplex 2.4GHz DS-16 Carbon Radio Systems!!!

Check out our New upcoming Jeti USA “Limited Edition” Christmas Line of Radio Systems!!! Only 20 pieces of Limited, All Numbered Radio Systems will be Released in Each of the Series. Total of 40 radio systems are Scheduled for 2014.

The Limited Edition, Numbered radios will be produced in either the Red/Black “Racer” or the Black/White “Phoenix” schemes. The set includes a Limited Edition Jeti DS-16 Carbon Transmitter, Carbon Commemorative Plaques, and Transmitter Case.

Production and shipping are scheduled between November 15 and December 15. All custom radios ordered by December 1 can be delivered by Christmas of 2014.
jeti-stitek-pametni1jeti-stitek-pametni2

jeti-ds-16-red

red-number

jeti-ds-16-black

black-number

Emcotec DPSI 2018 Power & Signal Distribution Unit

On By hajek

Emcotec DPSI 2018 Power & Signal Distribution Unit
Dual power supply which converts the M signals of five popular receiver systems to S. Bus and PWM signals. The system offers the possibility to connect up to 36 servo motors.

With the S. Bus system, several servo motors can be connected to the DPSI 2018 with just one single S. Bus cable. Consequently, there is only one cable that needs to be run through the fuselage to the tail and two additional cables to connect the wings.

The servo motors can be connected to the S. Bus cable at the very spot where they are needed using special S. Bus terminal blocks. Each servo motor can be addressed via its own unique identifier. For more details, click below!

(Full Story)