Jeti Telemetry Fuel Flow MFlow2 T and G EX digital flow sensors measure the true fuel flow of gasoline or turbine jet fuel.
The Jeti MFlow2 EX sensor allows you to set your “Low/High Fuel” alarms and gives you accurate reading of fuel consumption. Also allows you to setup remote commands for transmitter wireless value reset. Turbine flow sensor is equipped with Festo 4mm fuel line connectors. Gasoline sensor can be used with Medium 3/32″ (2.4mm), Large 1/8″ (3.2mm) ID fuel tubing.
Through the Duplex 2.4GHz system and either a JetiBox Profi or Jeti Transmitter you can monitor your data and alarm conditions in real time. Make sure that in the Devices folder of your SD card you have a configuration file “MFLOW2.bin”.
Flow Rate: 20 to 800 ml/minute with 2% resolution Operational Voltage: 5V to 8.4V Dimensions: 75mm x 40mm x 30mm Weight: 40g Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi
The 2018 JetPower Event in Donauwörth-Genderkingen is less than 24 hours away. Esprit Model is proudly cheering on Gernot Bruckmann and other fellow pilots as they compete this weekend. Looks like a fun filled weekend is ahead for all of them.
Follow Gernot Bruckmann as he prepares for the Tuscon Aerobatic Shootout!
The Tucson Aerobatic Shootout will be held this year, October 17th – 21nd in Tucson, Arizona. TIMPA is located just outside of Tucson at 3250 N Reservation Rd and gates will be open to the public. Admission for spectating is $5 per person with a maximum of $10 per car. Food vendors will be on site so come by and watch the best pilots from around the world compete for $100,000 in cash and prizes. The best days for spectators is during the freestyle rounds held Friday, Saturday, and Sunday. Taken from http://www.tucsonaerobaticshootout.com/
Gernot’s recent Facebook post on September 7, 2018 read:
Markus Rummer with CARF’s Trust Vectoring Mephisto 3D Aerobatic Jet, BavarianDemon Cortex Pro Stabilization and Jeti DS-24 Radio System performs mind blowing 3D aerobatic routine at the Weston Park 2018 RC show in UK.
New fresh update is rolling out all over our website. We are making continuous improvements to provide you with the best possible service. If something doesn’t looks right please refresh your browser and we guarantee that you will be pleasantly surprised.
When you thought it could not get any better…. It did! Introducing the newest in motor technology. Hardened steel shaft, 30mm oversize bearing, bolt-on prop adapter, integrated cooling fan and pre-installed Jeti telemetry sensors represent the highest level of quality.