| Esprit Elite 30cc E50/200 (12S/2600W) Esprit Elite 35cc E50/220 (12S/3700W) Esprit Elite 40cc E50/210 (12S/4000W) Esprit Elite 50cc E50/215 (12S/5750W) Esprit Elite 60cc E50/195 (12S/6250W) |
$225.00 $275.00 $319.00 $329.00 $359.00 |
Jeti Telemetry Fuel Flow MFlow2 T and G EX digital flow sensors measure the true fuel flow of gasoline or turbine jet fuel.
The Jeti MFlow2 EX sensor allows you to set your “Low/High Fuel” alarms and gives you accurate reading of fuel consumption. Also allows you to setup remote commands for transmitter wireless value reset. Turbine flow sensor is equipped with Festo 4mm fuel line connectors. Gasoline sensor can be used with Medium 3/32″ (2.4mm), Large 1/8″ (3.2mm) ID fuel tubing.
Through the Duplex 2.4GHz system and either a JetiBox Profi or Jeti Transmitter you can monitor your data and alarm conditions in real time. Make sure that in the Devices folder of your SD card you have a configuration file “MFLOW2.bin”.
Flow Rate: 20 to 800 ml/minute with 2% resolution
Operational Voltage: 5V to 8.4V
Dimensions: 75mm x 40mm x 30mm
Weight: 40g
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi
When you thought it could not get any better…. It did! Introducing the newest in motor technology. Hardened steel shaft, 30mm oversize bearing, bolt-on prop adapter, integrated cooling fan and pre-installed Jeti telemetry sensors represent the highest level of quality.
We have got some set-up suggestions! Check out what you can do with the new Esprit Motors!
E105/20-135 3D HD Outrunner Brushless Motor
|
E105/20 HD Series
|
105/20 – 135
|
|---|---|
| Kv (rpm/V) | 135 |
| Max Power (W) | 8500W |
| Max Amp (15sec) | 180A |
| Max Efficiency | 95% |
| Io (No load A) | 4.4A |
| Rm (Resistance) | 0.0218Ohm |
| Shaft Diameter | 10mm |
| Gearbox | N/A |
| Motor Diameter | 119mm |
| Motor Length | 83.5mm |
| Motor Weight | 1850g |
| Built in Fan | Yes |
| Max Rpm | 7,000 |
| Poles/Stator | 28/24 |
| Case | Outrunner |
| ESC Timing | 20-25 deg |
| ESC Switching Freq. | 8kHz |
| Model type | Motor | Controller | Battery | Prop | Power/A/RPM |
|---|---|---|---|---|---|
| Aerobatic/3D | 105/20-135 | Jeti Spin Pro 125 | 7000 12S Li-poly | 30×10 Fiala | 4350W/98A/4900 |
| Scale 45 lbs./20kg | 105/20-135 | Jeti Spin Pro 200 | 7000 12S Li-poly | 32×10 Fiala | 5350W/120A/4700 |
| Aerobatic 100-120cc | 105/20-135 | Jeti Spin Pro 200 | 7000 14S Li-poly | 28×12 Fiala | 6750W/130A/5500 |
E105/30-125 3D HD Outrunner Brushelss Motor
|
E105/30 HD Series
|
105/30 – 125
|
|---|---|
| Kv (rpm/V) | 125 |
| Max Power (W) | 9800W |
| Max Amp (15sec) | 200A |
| Max Efficiency | 95% |
| Io (No load A) | 5.7A |
| Rm (Resistance) | 0.0161Ohm |
| Shaft Diameter | 10mm |
| Gearbox | N/A |
| Motor Diameter | 119mm |
| Motor Length | 93.5mm |
| Motor Weight | 2400g |
| Built in Fan | Yes |
| Max Rpm | 7,000 |
| Poles/Stator | 28/24 |
| Case | Outrunner |
| ESC Timing | 20-25 deg |
| ESC Switching Freq. | 8kHz |
| Model type | Motor | Controller | Battery | Prop | Power/A/RPM |
|---|---|---|---|---|---|
| Scale/Sport | 105/30-125 | Jeti Spin Pro 200 | 7000 12S Li-poly | 32×12 Fiala | 5350W/120A/4400 |
| Scale 66 lbs./30kg | 105/30-125 | Jeti Spin Pro 200 | 7000 14S Li-poly | 32×10 Fiala | 7000W/135A/5150 |
| Scale 77 lbs./35kg | 105/30-125 | Jeti Spin Pro 200 | 7000 14S Li-poly | 32×12 Fiala | 7350W/142A/4850 |
| Aerobatic 150-200cc | 105/30-125 | Jeti Spin Pro 300 | 7000 15S Li-poly | 32×12 Fiala | 8900W/160A/5000 |
