Keep an eye out for the AXi 5345 HD Outrunner series Sailplane Motors. They are expected to be arriving next week. These high performance, extended shaft 5345 motors work great with large scale sailplanes and can work well in your special application project.
Note: Radial Mount and Support Shaft Ball Bearing Included
Take a look at this big boy! Bet you can’t guess what it’s flown with…. (We’ll give you a hint, It’s a Jeti). At a 108 lbs (49kg) and a rotor diameter of 10 feet (3.5m), reliability is a must, therefore it only makes sense to use a name you can trust.
Start off building season with a fully stocked bench. Check out the new line of JB Weld products, with so much to chose from, we are sure you will be stuck on us!
Let us help you with your power set up! Take a look at what one customer said about our recommendations!
Thank you Esprit!!
I installed this upgrade early this week. Have several flights on it.
Worth every penny.
Climbs from my hand to 450 ft. in 15 seconds.
Climbs from flying at 10 ft. to 500 ft. in 15 seconds.
I am using a TATTU 1550 mah 3 cell 75C battery.
This battery fits crosswise in the far aft pocket in the battery compartment.
I use 1 minute and 20 seconds of power on.
This gives me about 25 minutes of glide time in dead air, which is plenty for me. Battery voltage after this is 3.8 volts per cell.
Battery, ESC, and motor are cool after this.
The prop folds flat against the sides of the fuselage.
Seems like well planned sizes for all components. Except for the recommended battery, which I think is much bigger than I need.
This is not quite a drop in conversion, I had to remove the forward part of the G10 cross member. Not a problem and gave me a good chance to remove the heavy metal blocks that were buried in the foam.
-Russ K
In this Jeti Short, James takes you through gyro tuning via the Gyro Setting Menu.
What better accessory for your aircraft than a Fiala Propeller! Thanks Luciano for these photos of your beautiful Messerschmitt ME-109 and Spitfire sporting the 20×12 Fiala Black and Yellow Prop.
Introducing the new line of AXi Cyclone Inrunner/Outrunner Sailplane Brusheless Motors. These new lightweight motors come with pre-installed cooling fans and triple ball-bearing support. AXi’s Cyclone series are particularly suited for use in electric powered gliders due to their low installation profile.
We have safely made it through Hurricane Matthew with little to no damage. Monday morning operations will continue as normal. Thank you to all of you for your concerns and good thoughts.
-EM Team
Take a look at this amazing experimental RC Turbine Model.
JETI Studio is a cross-platform program for the visualization and analysis of telemetry data received from sensors. The program is available free of charge as a software support to the Duplex product line. Features include:
For the download link click here.
