New From Jeti: Jeti High Voltage Capacitor Module AddCap

AddCAP 820 and AddCAP 1640 are add-on capacitor units designed to enhance battery power supply for drive systems using low-impedance electric motors (1-2 pole), mostly Electric Ducted Fan or Geared Inrunner motors. They should also be used when the wires from your battery to your ESC need to be lengthened more than 200mm (8″). In cases where the wires are longer, use one AddCAP 820 or AddCAP 1640 for each 200mm (8″) section. Another advantage of adding an additional capacitor is to reduce possible interference which may be caused by current moving through your power wires. Recommended for use with 2.5-6 mm2 (14AWG – 10AWG) wires.

(Full Story)

jeti-hv-capacitor-addcap1640n jeti-hv-capacitor-addcap16402n jeti-hv-capacitor-addcap16403n

New Hitec X1 AC/DC Charger

Designed with absolute ease and portability in mind, the X1 Touch, 55-watt sensational charger, uses an 11 ~ 18VDC power source or an internal AC power supply to provide the versatility all pilots and racers desire. The 3.2-inch high resolution touch screen allows for effortless data monitoring and retrieval.

With a built-in internal cell balancer and multiple safety functions, its reliability is rock solid.

(Full Story)

hitec-x1-mcharger-wballancer hitec-x1-mcharger-wballancer2