We got creative with our Align drone and sent Skydiver Steven free falling from about 12,000 ft/3,600m (kidding only 12ft).
Steven Skydiver uses Jeti 1300mAh 6.6v LiFe battery pack and an R5L receiver. Drone uses Jeti MUI 150A and MAlti telemetry sensors with R3/RSW receiver using SBus protocol.
It looks like the new Heavy Duty line of E80 motors is exceeding our expectations. At 995g, the 28 Pole Design even pushed hard with a 22×12 propeller. The 12S battery runs surprisingly cold during our standard 3 minute motor test run in 30 seconds intervals.
Even when we achieved a power output of 4250W the temperature of the stator never exceeded 43.5C (110F) on the ground using our test stand. All this data was possible by using Jeti Telemetry and Data Logging features.
12S 22×12, 96A, 6950rpm, 45C, 4250W
12S 24×10, 110A, 6600rpm, 50C, 4850W