The Graupner Falcon 12 sets a new standard for flight controllers. The Falcon 12 is an airplane stabilizer, flybarless helicopter controller and multi-rotor controller all in one compact package that includes also real-time telemetry and a long-range receiver! Read more about it below.
The brand new Pulsar 2E Ultra Lite has been developed as a much improved follower of very successful Pulsar 2000 M. The wing is a built-up Balsa/Ply D-box design that utilizes classic balsa ribs and spare construction. The Hand-built wing and tail parts are covered with Ultracote. Fuselage is made of gel-coated fiberglass with kevlar reinforcement. All control surfaces come fully pre-hinged with Kevlar tape. This fully built electric sailplane needs only basic assembly. Pulsar has been built to minimize weight and maximize strength. The careful use of composites combined with an underlying wood structure in the wing ensures a good light structure that will hold its shape for a long time. This synergy of low weight and strong structure is very unusual in a production sailplane and can only be achieved with careful attention to design and construction. This is extremely light competition model. We have found the Pulsar to be an excellent light lift performer.
Read more in the link below for specific details!
AXi’s Radian XL Motor is back! Specially designed to fit inside the Radian XL’s fuselage, this is a must-have upgrade! Packed with the power, efficiency, and quality of any AXi motor, the 2826/12-30 Sailplane Brushless Motor with long shaft by AXi is sure to take your level of fun one step higher.
|
2826 Outrunner Series
|
2826/12
|
|---|---|
| Kv (rpm/V) | 760 |
| Max Power (W) | 655W |
| Max Amp (15sec) | 45A |
| Max Efficiency | 86% |
| Io (No load A) | 1.3A |
| Rm (Resistance) | 0.062Ohm |
| Shaft Diameter | 5mm |
| Gearbox | N/A |
| Motor Diameter | 35mm |
| Motor Length | 57.5mm |
| Motor Weight | 179g |
| Built in Fan | Yes |
| Max Rpm | 18,000 |
| Poles | 14 |
| Case | Outrunner |
| ESC Timing | 20-25 deg |
| ESC Switching Freq. | 8kHz |
In this video, James explains what a sequencer is, how it operates, and shows you an example. You will see how he uses a sequencer to utilize gear doors.
Introducing our newest addition to AXi 3D Extreme series brushelss Motors, the 5345 and 5360 Series. These motors offer integrated telemetry and the special steel shaft – providing that extra strength you need for all your extreme flights! Prices will start around $345.00 for the 5345 and $390.00 for the 5360. Check out the specs below!
Now that flying season is coming to a close, modelers are heading to their benches, starting their projects for next year. The million dollar question is, what will I need? Well, we thought about this long and hard, and realized that there are many basics that one shouldn’t be without. Read on to find out what our builders deemed most important.
1. The Dremel
One thing most molders find themselves doing a lot of is “Milling and Drilling”, and the proper tool can take this from a daunting task to a delightful project. We find that the MultiPro Cordless Rotary tool from Dremel works wonders. This two speed drill is great for almost any project, and coupled with the Flex Shaft Attachment, there is no place you can’t reach. Of course, don’t forget your basic tips such as the tapered carbine cutters, a cutting wheel, your sanding drums, and replacement sanding bands.
Now you can rep your favorite brands! These die-cut decals add that finishing touch to any aircraft or transmitter. Available in three sizes, and two color options. Check it out.
