Did you know that with the DS-12 you can assign Functions Wirelessly from Transmitter?
Every Jeti receiver provides a direct link for wireless programming. Log in to the receiver using.
Device Explorer in the transmitter menu and assign your servos to any receiver output pin that you choose.
Bad Rx location or short servo extensions are no longer a problem with the Jeti system.
Did you know that with the DS-12 you will setup Servo Fail-Safe Positions Wirelessly from Transmitter?
Every Jeti receiver provides a direct link for wireless programming. Log in to the receiver using the.
Device Explorer in your transmitter menu and setup servo Fail-Safe positions directly using the Tx screen.
No need to keep rebinding receivers or to keep them in accessible locations like with other systems.
Did you know that with the DS-12 you can see when your Receivers or Sensors are Connected?
Go to the Device Explorer menu in your transmitter and you can see if your Receiver is connected right on the Transmitter screen. Check marks show what devices are on-line and accessible.
Did you know that with the DS-12 you can easily change your Background and Profile Images?
Customize every screen and play with any backround. Jeti allows you to upload any image and even customize the location on your screen.
Did you know that with the DS-12 you can easily monitor and record the quality of your RF Link?
The DS-12 transmitter allows you to customize your screen and immediately see how your RF link is performing.
You can see A1 & A2 antenna strength in a scale from 0-9 and Signal Quality as a direct percentage. This allows you to set up custom telemetry alarms to alert you if there is a drop in your RF link.
Did you know that with the DS-12 you can change Screen Color on the fly?
Transmitter allows you to customize your screen and change colors anytime you like or need.
Did you know that with the Jeti DS-12 you can Soar with the Birds? Simple Plug & Play solution.
Jeti Variometer measures atmospheric pressure and using the obtained data it calculates the altitude above sea level, and the rate of climb and descent. The sensor also alerts you if any alarm setting is exceeded.
The acoustic signal consists of 4 different tones (steps) for climbing and the same amount of steps for descending. The step width can be adjusted by the user. The climb signal consists of short interrupted tones, the descent signal consists of long permanent tones.
Did you know that with the DS-12 you can easily monitor your Motor & Battery?
Stop guessing your flight time. Jeti lets you know exactly your used battery capacity (mAh), battery voltage (V) and how many Amp is your motor/propeller pulling. No longer you have to deal with damaged batteries or burned out motors.
Did you know that with the Jeti DS-12 you can fly like a bird?
Our simple Altitude telemetry sensor just works, find out your altitude, air pressure or temperature. Simple Plug & Play solution.